Course about Metrology for future HV transmission:
HV measuring techniques
24 May 2023

For future energy transmission, voltage levels are increasing to ultra-high voltage (UHV) levels of 1000 kV or above and transforming to direct current (DC) which is more efficient over long distances. Existing testing techniques and HV measuring systems and devices of HV laboratories currently used for AC, need to be changed or updated to be able to test new DC or AC/DC equipment, to measure present over voltages and to reach ultra-high voltage direct current (UHV-DC) present in future grids.

FFII and its LCOE laboratory organises a course to present these new HV measuring techniques. Some of these new evolutions, specially related to HV test techniques and partial discharges, dealing with the horizontal standards IEC 60060-1, IEC 60060-2 and IEC 60270, the need of new measuring systems, together with a revision of HV basic concepts will be presented.

AIM OF THE COURSE

High voltage and partial discharge test and measurement techniques are widely used in laboratory tests, for material qualification, on site tests for commissioning of HV installations and periodic verification tests of HV electrical insulation for maintenance or regulatory compliance. The purposes of this course are to describe the classical principles of HV and PD tests and measurements, as well as the changes that international standardization bodies propose for the revisions of the corresponding IEC standards.

PROGRAM (9:00 – 13:00)

The training course will be explained in Spanish with slides in English and with simultaneous translation into English.
High Voltage Measurement Techniques, IEC 60060-1. Approved and reference measuring systems. IEC 60060-2 modifications. Universal measuring systems.
Laboratory PD Measuring systems in accordance with IEC 60270. Wideband and narrowband partial discharge methods. Calibration. Expected uncertainty of PD measurements in the laboratory.
Test Techniques, on site PD measurements: HF, VHF and UHF. Characterization and Qualification of PD measuring systems for insulation condition diagnosis, TS 62478.
High Voltage testing, measurement and generation techniques in mobile laboratory: resonant generators, VLF, etc. Withstand voltage tests of cables and gas insulated systems, IEC 60060-3.
Visit to the High Voltage Laboratory. Presentation of 2.4 MV impulse generators, power frequency 1 MV (50 Hz), HVDC 800 kV (1.4 MV), Universal measuring system. Synthetic PD Calibrator for the Qualification of PD Analysers.

Registration includes lunch and coffee breaks, as well as documentation in electronic format. Confirmation of attendance at least two days before the Course. Limited attendees.

Workshop Metrology for
future HV transmission
24 May 2023

Furthermore, a workshop about Metrology for Future Energy Transmission is also offer for those companies that have special interest in the conclusions and results of the EURAMET 19ENG02 FutureEnergy Project. This session will be addressed by technical experts of the National Metrology Institutes and Universities participating in this Project: RISE from Sweden, PTB from Germany, LNE from France, VSL and TU Delft from Netherlands, VTT and TAU from Finland, TUBITAK from Turkey and FFII-LCOE and UPM from Spain.

PROGRAM (14:00 – 18:00)

The workshop will be explained in English.
WP1: UHVDC calibration and testing.
WP2: Lightning impulse voltage calibrations for UHV testing.
Poster session and coffee break.
WP3: Voltage dependance at HVAC.
WP4: Metrology for HVDC grid condition monitoring.

AIM OF THE WORKSHOP

The aim of this workshop is to present the metrological developments of the FutureEnergy EURAMET project aimed at supporting the growth of future energy transmission networks.

REGISTRATION (FREE OF CHARGE)

– Form of support for the project is required from each company.
– Registration by e-mail: formacion@ffii.es
– Venue: Tecnogetafe, Eric Kandel 1, 28907 Getafe, Madrid.
Registration includes lunch and coffee breaks, as well as documentation in electronic format. Confirmation of attendance at least two days before the Workshop. Limited attendees.
field of HV.
Technicians working in product standardization or specification in the field of HV.
Manufacturers of HV electrical equipment.
Manufacturers of measuring systems for HV laboratories, mobile laboratories and HV monitoring systems.
Independent consultants.
Anyone who want to know the new metrological developments of future HVDC networks.

ADDRESSED TO

The course and workshop are aimed at a wide spectrum of technicians of the electrical sector:
Laboratory technicians.
Inspectors of high voltage material.
Technicians of assessment bodies in charge of on-site tests using mobile HV generators or PD meters.
High Voltage electricians and engineers involved with HV projects and design.
Metrologists, teaching staff and professional specialists in HV electrical measurements.
Technicians from TSO and DSO related to commissioning and HV testing.
Maintenance and standardization personnel in the field of HV.

Technicians working in product standardization or specification in the field of HV.
Manufacturers of HV electrical equipment.
Manufacturers of measuring systems for HV laboratories, mobile laboratories and HV monitoring systems.
Independent consultants.
Anyone who want to know the new metrological developments of future HVDC networks.

TRANSPORT

A free bus will depart from Atocha station at 8:30 a.m. to access to the LCOE facilities in Tecnogetafe. You can return to the Atocha station by bus from the Tecnogetafe central building at 6:00 p.m. with scheduled arrival to Atocha station at 6:30 p.m.